Dell PowerVault DX6112 - Manual (Page 57)

Figure 22. Removing and Installing the Expansion Card
1. expansion card
2. expansion-card latch
3. expansion-card connector
4. expansion-card riser
5. power connector (for GPU cards)
Installing An Expansion Card Into The Expansion-Card Riser 2 Or 3
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Unpack the expansion card and prepare it for installation.
For instructions, see the documentation accompanying the card.
2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
3. Open the system.
4. Lift the expansion-card latch and remove the filler bracket.
57