Dell PowerEdge C5220 - Manual (Page 28)

28
Mouse Mode
On the Mouse Mode page, you can configure the mouse mode options.
IPMI is an OS-independent platform, and KVM support is an added feature
for IPMI. For your mouse to function properly, please configure the mouse
mode settings according to the mouse is absolute coordinates or relative
Table 1-17. Mouse Mode
Item Description
Current Mouse Mode Absolute or Relative.
NOTE: Both Absolute and Relative modes enable you to see
two mouse cursors where, the redirected host mouse cursor
and the actual local mouse cursor. When the single cursor
checkbox is selected, only the redirect mouse cursor is
visible.
Set Mode to Absolute
Option
Select this option to select mouse mode to Absolute,
depending upon your system.
Set Mode to Relative
Option
Select this option to select mouse mode to Relative,
depending upon your system. If you select the single
mouse checkbox, it locks the local mouse cursor inside the
redirected window and the user has to press to
unlock and stop mouse redirection. Here is
basically used to start or stop mouse redirection.
Save Button Use this button to make the settings active.