Dell PowerEdge C5220 - Manual (Page 57)

57
Table 1-47. Sensory Device Commands
Command NetFn CMD O/M Supported
Get Device SDR Info S/E 20h O No
Get Device SDR S/E 21h O No
Reserve Device SDR Repository S/E 22h O No
Get Sensor Reading Factors S/E 23h O Yes
Set Sensor Hysteresis S/E 24h O Yes
Get Sensor Hysteresis S/E 25h O Yes
Set Sensor Threshold S/E 26h O Yes
Get Sensor Threshold S/E 27h O Yes
Set Sensor Event Enable S/E 28h O Yes
Get Sensor Event Enable S/E 29h O Yes
Re-arm Sensor Events S/E 2Ah O Yes
Get Sensor Event Status S/E 2Bh O Yes
Get Sensor Reading S/E 2Dh M Yes
Set Sensor Type S/E 2Eh O No
Get Sensor Type S/E 2Fh O No
Set Sensor Reading and Event
Status
S/E 30h M Yes
Table 1-48. LAN Commands
Command NetFn CMD O/M Supported
Set LAN Configuration
Parameters
Transport 01h M Yes
Get LAN Configuration
Parameters
Transport 02h M Yes
Suspend BMC ARP Transport 03h O Yes
Get IP/UDP/RMCP Statistics Transport 04h O No
NOTE: LAN parameter from 192 to 255 is reserved for OEM parameters.