Dell PowerVault MD3000i - Manual (Page 45)

About Your Host 45
4 Specify the HBA host ports by choosing known host ports or by manually
defining host ports.
To select a host port that is already recognized by MD Storage Manager,
click a host port in the Known HBA host ports list, then click Add.
To manually define a host port, click New, enter the HBA host port and
Alias in the Enter New HBA Host Port dialog box, and then click Add.
5 Click Next.
6 Indicate whether the host is part of a host group (cluster):
If the host is not part of a host group, select No.
If the host is part of a host group, select Yes:
– To create a new host group, enter a name in the Enter new host group
name text box.
– To add the host to an existing host group, select the host group from
the Select existing host group box.
7 Click Next.
8 Click Finish to configure the host.
Manual Configuration (using iSCSI)
Configure the host to make it available to the storage array for LUN mapping
by following these steps.
1 Click the Configure tab and then click Configure Host Access (Manual).
2 Type a name of your choice in the Enter host name text box.
This can be an informal name, not necessarily a name used to identify the
host to the network.
3 Select the operating system of your host in the Select host type drop-down
box and then click Next.
4 Specify the iSCSI initiators by choosing known initiators or by manually
defining initiators.
To select an initiator that is already recognized by MD Storage Manager,
click an initiator in the Known iSCSI Initiators list, and then click Add.