Dell PowerEdge 750 - Manual (Page 47)

l Error message indicates a system board problem.
Action
1. Open the system. See " Opening the System ."
2. Remove the expansion cards, if installed. See " Removing an Expansion Card " in "Installing System Components."
3. Close the system. See " Closing the System ."
4. Run the system board tests in the system diagnostics. See " Running the System Diagnostics ."
If the tests do not run successfully, see " Getting Help ."
5. Open the system. See " Opening the System ."
6. Reinstall the one of the expansion cards that you removed in step 2 . See " Installing an Expansion Card " in "Installing System Components."
7. Close the system. See " Closing the System ."
8. Run the system board tests again.
If the tests do not complete successfully, the expansion card might be faulty. See " Getting Help ."
If the tests complete successfully, repeat step 5 through step 8 for the remaining expansion card, if applicable.
Back to Contents Page