Poor copy quality – Dell B3465dn Mono Laser Multifunction Printer User Manual
Page 288
Poor copy quality
Action
Yes
No
Step 1
Check if an error or status message appears on the display.
Does an error or status message appear?
Clear the error or status
message.
Go to step 2.
Step 2
Check the quality of the original document.
Is the quality of the original document satisfactory?
Go to step 3.
Increase the scan
resolution setting for a
higher
‑quality output.
Step 3
If dark marks appear on prints, then clean the scanner glass and the ADF
glass using a clean, lint-free cloth dampened with water.
Is the scanner glass clean?
Go to step 4.
See
.
Step 4
Send a print job, and then check for print quality problems.
a
From the General Settings menu, adjust the Eco
‑Mode settings.
b
From the Copy menu, adjust the toner darkness.
c
If the print remains faded, then replace the toner cartridge.
Is the print quality satisfactory?
Go to step 5.
See
.
Step 5
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?
Go to step 6.
Place the document or
photo facedown on the
scanner glass in the
upper left corner.
Step 6
Increase the scan resolution setting for a higher
‑quality output.
Did the increased resolution produce a higher
‑quality output?
The problem is solved. Go to step 7.
Step 7
Check the copy settings.
From the Copy screen, check if the Content Type and Content Source
settings are correct for the document being scanned.
Are the Content Type and Content Source settings correct for the
document being scanned?
Go to step 8.
Change the Content
Type and Content
Source settings to
match the document
being scanned.
Troubleshooting
288