Dell Dimension 4700 - Manual (Page 80)

80
Removing and Installing Parts
www
.dell.com | support.dell.com
8 Reinstall the existing hard drive into the computer in front of the additional drive
(see page 77).
9 Connect a power cable to the drive.
10 Connect the data cable to the drive and to the system board (see page 56).
11 Replace the computer cover (see page 89).
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into
the computer.
12 Connect your computer and devices to electrical outlets, and turn them on.
13 See the documentation that came with the drive for instructions on installing any software
required for drive operation.
front computer frame
bracket tabs (2)
drive slots (2)
drive bracket
bracket-securing
screw
bracket-securing
screw
additional hard drive