S-video and standard audio – Dell XPS M1710 (MXG061, Early 2006) User Manual
Page 59
Using CDs, DVDs, and Other Multimedia
59
S-Video and Standard Audio
1 Turn off the computer and the TV and/or audio device that you want to connect.
NOTE:
You can connect an S-video cable directly to the S-video TV-out connector on the computer (without the
TV/digital audio adapter cable) if your TV or audio device supports S-video but not S/PDIF digital audio.
2 Plug one end of the S-video cable into the S-video output connector on the computer.
3 Plug the other end of the S-video cable into the S-video input connector on your TV.
4 Plug the single-connector end of the audio cable into the headphone connector on your computer.
5 Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on
your TV or other audio device.
6 Turn on the TV and any audio device that you connected (if applicable), and then turn on the
computer.
7 See "Enabling the Display Settings for a TV in Microsoft
XP" on page 70 to ensure that
the computer recognizes and works properly with the TV.
1
audio connector
2
S-video TV-out connector
1
standard S-video cable
2
standard audio cable
1
2
1
2