Dell POWEREDGE M1000E - Manual (Page 58)

Closed with Code Change in Fabric OS v6.4.0a
Fabric OS v6.4.1 Release Notes v1.0 Page 58 of 62
Defect ID: DEFECT000297793 Technical Severity: High
Summary: Data encryption, name server fails to show the existence of a specific virtual initiator
Symptom: As a result of an external FC port experiencing an excessive number of encoding CRC errors
the internal ports are faulted incorrectly by switch firmware, hence a data encryption virtual
initiator associated with the internal port fails to appear in name server.
Workaround: Remove the condition / cause of the excessive CRC errors (ie replace cable or SFP).
Feature: Data Security Function: Platform
Probability: Low
Found in Release: FOS6.4.0
Defect ID: DEFECT000297978 Technical Severity: High
Summary: Zoned terminated while activating zoning from DCFM
Symptom: Unexpected reboot and failover if attempt to push zone DB from DCFM in IM2/IM3 fabrics
only.
Workaround: Use CLI (or ECFM for non-TI/Redirect zones) in IM2/IM3
Feature: FC Services Function: Zoning
Probability: Medium
Found in Release: FOS6.4.0
Where Else Fixed: FOS6.3.1 b
Defect ID: DEFECT000298015 Technical Severity: High
Summary: After code upgrade, non Brocade branded SFPs got Mod_Val.
Symptom: non-Brocade branded SFPs are in Mod_Val state after firmware upgrade. This impacts FOS
v6.2.2x and FOS v6.3.1x only with 1 specific non-Brocade branded SFPs.
Workaround: Use Brocade branded SFPs
Feature: 4G Platform Services Function: FOS Kernel Drivers
Probability: Low
Found in Release: FOS6.4.0
Defect ID: DEFECT000298098 Technical Severity: High
Summary: FICON: NSD panic while running IRNDUP to SW48K
Symptom: Missing interrupt (IFCC) while running IRNDUP
Feature: FC Services Function: Name Server
Probability: Medium
Found in Release: FOS6.4.0