Dell Inspiron 3000 - Manual (Page 93)

Removing and Replacing Parts 4-57
12.1
-Inch LCD Components
The 12.1-inch LCD assembly consists of the following components:
• Front bezel
• LCD panel
• Inverter board and cable
• Hinges
• Bracket
• Back cover
• LCD flex cable
The following subsections provide removal and replacement procedures for
these components and assumes that the 12.1-inch LCD assembly has been
removed from the computer. See “LCD Assembly” found earlier in this chapter.
12.1-Inch LCD Front Bezel
Figure 4-40. 12.1-Inch LCD Front Bezel Removal
To remove the 12.1-inch LCD front bezel, follow these steps:
1. Remove the LCD assembly.
See “LCD Assembly” found earlier in this chapter.
2. Use a dental pick to pry the front-bezel screw covers and upper bumpers out
of the screw holes in the bezel.
bezel screw
covers (2)
(screws F1– F4
are 5 mm)
F1
F2
front bezel
F3
F4
5 mm
upper bumpers (2)