Dell Inspiron 3000 - Manual (Page 102)

4-66 Dell Inspiron 3000 Series Service Manual
3. Remove the LCD panel.
NOTE: Be careful when removing any part of the LCD cable harness.
Lift up the LCD panel, and disconnect the LCD cable harness from connec-
tor J1 on the back of the LCD panel (for an IBM panel, hold the cable
ground strap in place with one hand and peel back the EMI tape covering
that holds the ground strap in place on the cable). Disconnect the
LCD-to-inverter cable from inverter-board connector CN2 on the side of the
inverter board next to the back cover (see Figure 4-47).
4. Remove grounding screw GS1 from the bracket.
CAUTION: When reinstalling an IBM LCD cable, slide the cable
underneath the ground strap in place and reapply the EMI tape.