Removing the rf module, Replacing the rf module – Dell Studio One 19 (1909, Early 2009) User Manual
Page 5

6.
Replace the shield (see
Replacing the Shield
).
7.
Replace the computer cover (see
Replacing the Computer Cover
).
Removing the RF Module
1.
Follow the instructions in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the shield (see
Removing the Shield
).
4.
Remove the stand (see
Removing the Stand
).
5.
Remove the back I/O panel (see
Removing the Back I/O Panel
).
6.
Remove the processor fan (see
Removing the Processor Fan
).
7.
Remove the right speaker (see
Removing the Right Speaker
)
8.
Remove the optical drive (see
Removing the Optical Drive
).
9.
Remove the screw securing the radio frequency (RF) module, flip the module and disconnect the RF module cable.
Replacing the RF Module
1.
Follow the instructions in
Before You Begin
.
2.
To install the RF module, connect the RF module cable.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1
RF module cable
2
RF module
3
screw