Speakers, Removing the right speaker, Replacing the right speaker – Dell Studio One 19 (1909, Early 2009) User Manual
Page 35
Back to Contents Page
Speakers
Dell Studio One 19/1909 Service Manual
Removing the Right Speaker
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the shield (see
Removing the Shield
).
4.
Remove the stand (see
Removing the Stand
).
5.
Remove the processor fan and heat sink (see
Removing the Heat Sink
and
Removing the Processor Fan
).
6.
Remove the four screws that secure the speaker to the chassis.
7.
Disconnect the right speaker cable from the connector (SPEAKER_2) on the system board.
8.
Lift the speaker away from the chassis.
Replacing the Right Speaker
1.
Follow the procedures in
Before You Begin
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
To locate the right speaker, see
Inside View of Your Studio One
.
NOTE:
Make a note of the cable routing before you dislodge the cable.
1
screws (4)
2
speaker cable