Dell Studio One 19 (1909, Early 2009) - Manual (Page 21)

Replacing the Inverter
1. Follow the procedures in Before You Begin .
2. To replace the inverter, connect the two cables from the LCD panel to the inverter.
3. Connect the inverter cable to the system board connector (INVERTER).
4. Replace the two screws that secure the inverter to the chassis.
5. Replace the optical drive (see Replacing the Optical Drive ).
6. Replace the right speaker (see Replacing the Right Speaker ).
7. Replace the processor fan and heat sink (see Replacing the Heat Sink and Replacing the Processor Fan ).
8. Replace the back I/O panel (see Replacing the Back I/O Panel ).
9. Replace the stand (see Replacing the Stand ).
10. Replace the shield (see Replacing the Shield ).
11. Replace the computer cover ( Computer Cover ).
Back to Contents Page