Inverter, Removing the inverter – Dell Studio One 19 (1909, Early 2009) User Manual
Page 20

Back to Contents Page
Inverter
Dell Studio One 19/1909 Service Manual
Removing the Inverter
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the shield (see
Removing the Shield
).
4.
Remove the stand (see
Removing the Stand
).
5.
Remove the back I/O panel (see
Removing the Back I/O Panel
).
6.
Remove the processor fan and heat sink (see
Removing the Heat Sink
and
Removing the Processor Fan
).
7.
Remove the right speaker (see
Removing the Right Speaker
).
8.
Remove the optical drive (see
Removing the Optical Drive
).
9.
Remove the two screws that secure the inverter to the chassis.
10.
Disconnect the inverter cable from the inverter.
11.
Disconnect the two cables that connect the inverter to the LCD panel.
12.
Lift the inverter out of the chassis.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1
screws (2)
2
cables to the LCD panel (2)
3
inverter cable