Dell Inspiron 17R (N7110, Early 2011) - Manual (Page 22)

22 Module Cover
Replacing the Module Cover
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the module cover with the slots on the computer base
and gently snap the cover in place.
3 Tighten the captive screw that secures the module cover to the computer
base.
4 Replace the battery (see "Replacing the Battery" on page 16).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 captive screw 2 module cover
3 tabs (3)
2
3
1
book.book Page 22 Friday, April 13, 2012 2:02 PM