Removing the display panel brackets, Removing the display latch – Dell Latitude D830 (Early 2007) User Manual
Page 19

3.
Replace the display bezel .
Removing the Display Panel Brackets
1.
Follow the procedures in
Before You Begin
.
2.
Remove the display assembly (see
).
3.
).
4.
Remove the display panel (see
5.
Remove the four M2 x 3-mm screws from the right display panel side bracket and lift away the bracket.
6.
Remove the four M2 x 3-mm screws from the left display-panel side bracket and lift away the bracket.
Removing the Display Latch
1.
Follow the procedures in
Before You Begin
.
2.
Remove the display assembly (see
).
3.
).
4.
Remove the display panel (see
5.
Remove the four M2 x 3-mm screws from the top display panel bracket and lift away the bracket.
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back
panel of the computer.
1
display panel
2
display panel side bracket
3
screws (4)
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back
panel of the computer.
1
screws (4)
2
top display panel bracket
3
top cover