Dell 1720/dn Mono Laser Printer - Manual (Page 23)

USB Menu
Use the USB menu to change printer settings on jobs sent through a USB port.
Utilities Menu
Use the Utilities menu to troubleshoot printer problems.
* Factory default setting
Energy Conserve Specify whether you want Disabled to appear in the Power Saver menu.
On*
Off
From this
menu:
You can:
* Factory default setting
NPA Mode Send print jobs to the printer and query printer status information at the same time.
Off
On
Auto*
MAC Binary PS Configure the printer to process Macintosh binary PostScript print jobs.
Off—the printer filters PostScript print jobs using standard protocol.
On—the printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system.
NOTE: This setting can cause print jobs sent from Windows to fail.
Auto*—the printer processes print jobs from computers using either Windows or Macintosh
operating systems.
USB Speed Specify the speed of the USB cable you are using.
Full
NOTE: This forces the USB port to run at full speed, disabling all high-speed capabilities.
Auto*
From this
menu:
You can:
Print
Configuration
Mode
Instructions
Press and hold the Continue button .
Reset Factory
Defaults
Return your printer settings to the factory default values by pressing and holding the Continue button
.
NOTE: All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are
deleted. Resources in flash memory are unaffected.
Hex Trace Help isolate printing problems when unexpected characters print or characters are missing. Hex Trace
helps you determine if there is a problem with the language interpreter or the cable by telling you what
information your printer is receiving.