Dell 1720/dn Mono Laser Printer - Manual (Page 52)

Installing Optional Hardware
Installing the 550-Sheet Optional Drawer
Configuring the Paper Trays
Installing an Optional Memory Card
Installing the 550-Sheet Optional Drawer
An optional drawer attaches under the printer. A drawer consists of two parts: a tray and a support unit. Your printer
supports one optional drawer that holds up to 550 sheets of paper.
1. Unpack the drawer, and remove any packing material.
2. Place the drawer in the location you have chosen for your printer.
NOTE: If you have optional memory to install, leave clearance on the right side of the printer.
3. Align the holes in the printer with the positioning posts on the drawer, and lower the printer into place.
Configuring the Paper Trays
Dell™ Laser Printer 1720/1720dn — Attached Locally to a Computer
1. Click Start® Programs or All Programs® Dell Printers® Dell Laser Printer 1720.
For Windows Vista (default Start menu):
a. Click ® Programs.
CAUTION: If you are installing a drawer after setting up the printer, turn off the printer, and unplug the
power cable before continuing.
NOTE: You must first install the software for your printer before configuring the paper trays. For more information,
see Setting up for Local Printing or Setting up for Network Printing .