Controlling user status – Dell KVM 2161DS User Manual

Page 139

Managing Your Remote Console Switch Using the On-board Web Interface

123

Figure 6-16. SIP Version Window

4 Compare the current information to the Firmware Available field to see

the firmware upgrade available for the SIP. (You can load firmware even if

the current and available versions are the same. In some cases, you can

downgrade the SIP to an older, compatible version.)

5 Click the Load Firmware button.
6 The firmware upgrade begins. During the upgrade, a progress message is

displayed below the

Firmware Available box and the Load Firmware

button will dim. When the upgrade is finished, a message appears

indicating that the upgrade was successful.

7 Repeat steps 2-6 for each individual SIP you wish to upgrade.
8 When finished, click OK.

Controlling User Status

You may view and disconnect the current active user connections using the

Status tab in the on-board web interface. You can view the session type, the

server name, or SIP to which they are connected and their system address. In

addition to disconnecting a user session, the on-board web interface also

allows one user to take control of a server currently being used by another