Dell KVM 2161DS - Manual (Page 14)

xiv
• If any of the following conditions occur, unplug the product from the
electrical outlet and replace the part or contact your trained service
provider:
–
The power cable, extension cable, or plug is damaged.
– An object has fallen into the product.
– The product has been exposed to water.
– The product has been dropped or damaged.
– The product does not operate correctly when you follow the operating
instructions.
• Keep your system away from radiators and heat sources. Also, do not block
cooling vents.
• Do not spill food or liquids on your system components, and never operate
the product in a wet environment. If the system gets wet, see the
appropriate section in your troubleshooting guide or contact your trained
service provider.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal
components.
• Operate the product only from the type of external power source indicated
on the electrical ratings label. If you are not sure of the type of power
source required, consult your service provider or local power company.
NOTICE: To help avoid damaging your system, be sure the voltage selection switch
(if provided) on the power supply is set for the voltage that most closely matches
the AC power available in your location. Also be sure that your monitor and
attached devices are electrically rated to operate.
• Be sure that your monitor and attached devices are electrically rated to
operate with the power available in your location.
• Use only power cables provided with this product.
• To help prevent electric shock, plug the system and peripheral power
cables into properly grounded electrical outlets. These cables are equipped
with three-prong plugs to help ensure proper grounding. Do not use
adapter plugs or remove the grounding prong from a cable.