Dell KVM 2161DS User Manual

Page 137

Managing Your Remote Console Switch Using the On-board Web Interface

121

Figure 6-14. Upgrade Switch Firmware Window

4 Click the Upgrade button. The Upgrade button dims and a progress

message and progress bar appears.

5 When the upgrade is complete, the Remote Console Switch will reboot.

NOTICE:

Do not power down the Remote Console Switch while it is upgrading.

You can upgrade firmware for all SIPs of a given type.
To simultaneously upgrade multiple SIPs:

1 Click the Tools tab in the on-board web interface. The Tools window

appears.

2 Click the Upgrade SIP Firmware button. The Upgrade SIP Firmware

window appears.

3 Click the check box in front of each type (PS/2,USB, USB2, Serial, or Sun)

of SIP you wish to upgrade.

NOTE:

A disabled check box indicates that all SIPs of that type are running the

correct firmware, or that no SIP of that type exists in the system.