Dell KVM 2161DS - Manual (Page 170)

154 LDAP Feature for the Remote Console Switch
Login Timeout
In cases where there is a large enough directory tree to cause LDAP
authentication to perform slowly, the Sessions window includes a Login
Timeout function with a default timeout of 30 seconds. The login timeout is
the time from which the user presses the OK button on the Login dialog box
until there is no response from the appliance. The appliance will also use this
value to determine the timeout on a LDAP request for authentication.
To specify the login timeout in the on-board web interface:
1 Click the Configure tab, then click Remote Console Switch - Sessions.
2 Specify the number of seconds in the Login Timeout menu.
3 Click Save.
Figure 8-5. On-board Web Interface - Login Timeout
CA Certificate Information Display
The Remote Console Switch can only display complete CA Certificate
Information in this window when the public key length is less than or equal to
2048 bits. When the key is greater than 2048 bits, the subject, issuer, and
validity period data in this window will be incomplete.