beautypg.com

Dell PowerVault 35F (Fibre Channel Bridge) User Manual

Page 34

background image

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide

file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]

using the Autobaud feature, it will not be necessary to set a baud rate. See

Installing the PowerVault 35F

for more

information on using the autobaud feature.

Fibre Channel Configuration

This option allows for setting the Fibre Channel Address method, hard address value, and WWN overrides.

When configuring the Fibre Channel AL_PA, the PowerVault 35F will present a list of loop addresses along with the
corresponding AL_PA. The user selects the loop address desired.

SCSI Configuration

This option allows for setting the SCSI Initiator ID, enabling SCSI target IDs, and setting the SCSI bus reset behavior.

See also other documents in the category Dell Computer hardware: