beautypg.com

Connecting the power cord – Dell PowerVault 35F (Fibre Channel Bridge) User Manual

Page 18

background image

Installing the PowerVault 35F: Dell PowerVault 35F User's Guide

file:///C|/Users/rishi_sood/Desktop/35F/ug/install.htm[3/21/2013 11:16:18 AM]

Connecting the power cord

The PowerVault 35F is shipped with the appropriate power cord for use in your region or country.

To connect the power cord to the PowerVault 35F:

1. Make sure the PowerVault 35F’s power is switched off. See

Fig. 11

for the location of the power switch on the

back of the bridge.

2. Connect the appropriate end of the power cord to the power connector on the back of the PowerVault 35F.
3. Plug the three-pronged end of the power cord into the power source.

Figure 11. PowerVault 35F power switch and outlet

Back to Contents Page

See also other documents in the category Dell Computer hardware: