Dell PowerVault 35F (Fibre Channel Bridge) User Manual

Page 30

Text mode
Original mode

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide

file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]

Change IP Address

The default IP address is 1.1.1.1. If you would like to change the IP address, select 1) Change IP Address. You will
be asked to enter a new IP address. The new IP address will be reflected when the new Ethernet/SNMP Configuration
menu appears.

Change IP Subnet Mask

The default IP subnet mask is 255.255.255.0. If you would like to change the IP subnet mask address, select 2) Change
IP Subnet Mask. You will be asked to enter a new IP subnet mask. The new IP subnet mask will be reflected when
the new Ethernet/SNMP Configuration Menu appears.

NOTE: The bridge must be rebooted for the new IP address to take effect.

Change SNMP Settings

If you would like to change SNMP Settings, select 3) from this menu. You will see a menu similar to the following
appear: