Dell PowerVault DL2200 CommVault - Manual (Page 20)

20
About Your System
Hard drive failure. Ensure that the hard drive are
properly connected. See "Hard
Drives" on page 67 for
information on the drives
installed in your system.
Possible USB failure. See "Troubleshooting a USB
Device" on page 130.
No memory modules
detected. See "Troubleshooting System
Memory" on page 137.
System board failure. See "Getting Help" on page 157.
Memory configuration
error. See "Troubleshooting System
Memory" on page 137.
Possible system board
resource and/or system
board hardware failure. See "Getting Help" on page 157.
Possible system resource
configuration error. See "Contacting Dell" on
page 157.
Other failure. Ensure that the hard drives are
properly connected. See
"Troubleshooting a Hard Drive"
on page 139 for the appropriate
drive installed in your system. If
the problem persists, see "Getting
Help" on page 157.
Table 1. Diagnostic Indicator Codes (continued)
Code Causes Corrective Action
book.book Page 20 Wednesday, May 12, 2010 9:26 PM