Video and monitor problems, No sound from headphones, If the screen is blank – Dell Dimension 4600C User Manual
Page 40
40
Solving Problems
www
.dell.com | support.dell.com
No sound from headphones
Video and Monitor Problems
If the screen is blank
NOTE:
See the monitor documentation for troubleshooting procedures.
R
EINSTALL
THE
AUDIO
(
SOUND
)
DRIVER
—
See page 49.
C
HECK
FOR
INTERRUPT
REQUEST
CONFLICTS
—
See page 52.
C
HECK
THE
HEADPHONE
CABLE
CONNECTION
—
Ensure that the headphone cable is securely inserted into
the headphone connector (see page 53).
D
ISABLE
DIGITAL
MODE
—
Your headphones do not work if the CD drive is operating in digital mode.
To disable digital mode:
1
Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
2
Click Sounds and Audio Devices.
3
Click the Hardware tab.
4
Double-click the name of your CD drive.
5
Click the Properties tab.
6
Uncheck the Enable digital CD audio for this CD-ROM device box.
A
DJUST
THE
W
INDOWS
VOLUME
CONTROL
—
Click or double-click the speaker icon in the lower-right
corner of your screen. Ensure that the volume is turned up and that the sound is not muted.
C
HECK
THE
MONITOR
POWER
LIGHT
—
If the power light is off, firmly press the button to ensure that the
monitor is turned on. If the power light is lit or blinking, the monitor has power. If the power light
is blinking, press a key on the keyboard or move the mouse.
C
HECK
THE
MONITOR
CABLE
CONNECTION
—
Check the connector for bent or broken pins. (It is normal
for monitor cable connectors to have missing pins.) Ensure that the video cable is connected as
shown on the setup diagram for your computer.
T
EST
THE
ELECTRICAL
OUTLET
—
Ensure that the electrical outlet is working by testing it with another
device, such as a lamp.