Dell 2300 Wireless Broadband Router User Manual
Page 171
Configuring your router for Wireless Bridging:
1. Open your web browser and go to
the default address
2. Click the Advanced Settings tab on the top navigation bar.
3. Click the Advanced wireless button on the left navigation bar.
4. Ensure Enable Wireless is checked.
5. Type your wireless network name in the Network name (SSID) field if you desire to change it from default
settings “Wireless”.
6. Ensure Advanced Options is unchecked.
7. Enable Wireless Bridge.
8. Enter the Wireless MAC address(es) of the other Dell TrueMobile 2300 Wireless Broadband Router(s) that
you want to bridge.
NOTE: To connect two bridges together, enter the MAC address of the bridge at the other end. To
connect three bridges together, enter the MAC addresses of the other two bridges in the bridge
acted as the multipoint center. The other two bridges only need to be entered the MAC address of
the center bridge.
9. Click the Submit button.
10. Click the Save & Restart button.
11. When your web browser returns to the main page of the Wireless Broadband Router, the device has
successfully restarted with the new settings.