Insufficient memory to collate job [37 – Dell B3460dn Mono Laser Printer User Manual
Page 118
Insufficient memory to collate job [37]
Try one or more of the following:
•
From the printer control panel, press
to print the portion of the job already stored and begin collating the rest
of the print job.
•
Cancel the current print job.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
•
From the printer control panel, press
to stop the defragmentation and continue printing.
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:
> Settings >
> Settings >
>Print Settings >
> Utilities Menu >
> Format Flash >
> Yes >
•
Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, press
to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Do either of the following:
•
From the printer control panel, press
to clear the message.
•
Delete other held jobs to free up additional printer memory.
Load [paper source] with [custom string] [orientation]
Try one or more of the following:
•
Load the indicated tray or feeder with the correct size and type of paper.
•
From the printer control panel, press
to clear the message and continue printing.
Note: If the printer finds a tray that has the correct paper type and size, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
Troubleshooting
118