Loading paper, Setting the paper size and paper type – Dell 2330d/dn Mono Laser Printer User Manual

Page 83

Loading Paper

Setting the Paper Size and Paper Type

Setting the Paper Size and Paper Type

Dell™ 2330d Laser Printer — Attached Locally to a Computer

After you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any trays

containing the same size and type are automatically linked by the printer.

NOTE:

If the size of the paper being loaded now is the same size as the previously loaded paper, do not change the

Paper Size setting.

1. Ensure that the printer is on and Ready appears.

2. From the operator panel, press the Menu button until Paper Menu appears.

3. Press the Select button .

4. Press the Arrow buttons until Size/Type appears, and then press the Select button .

Select Source

appears.

5. Press the Arrow buttons until the correct source appears, and then press the Select button .

Size

appears under the source name.

6. Press the Select button .

7. Press the Arrow buttons until the correct size appears, and then press the Select button .

Submitting Changes

appears, followed by Size.

8. Press the Arrow buttons until Type appears, and then press the Select button .

9. Press the Arrow buttons until the correct type appears, and then press the Select button .

Submitting Changes

appears, followed by Type.

NOTE:

You must install the software for your printer before configuring the paper trays. For more information, see