Dell 2330d/dn Mono Laser Printer - Manual (Page 38)

1. From the menu list, use the Arrow buttons to scroll to the Setup menu.
2. Press the Select button .
3. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button
.
4. Use the Arrow buttons to scroll through the available menu items.
5. When the setting you want appears on the display, press the Select button to save the setting.
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
Setup Mode
Main Menu Mode Main Menu
Setup Printer Language
Print Area
Download Target
Resource Save
Setup Mode Main Menu
From
this
menu:
You can:
*Factory default setting
Printer
Language
Define the default printer language used to communicate data from the
computer to the printer.
PS Emulation
PCL Emulation*
Print Area Modify the logical and physical printable area.
Normal*
Whole Page
Download
Target
Specify the storage location for downloaded resources.
RAM*
Flash
NOTE: Download Target appears only if flash option is installed.
Resource
Save
Specify whether all permanent downloaded resources, such as fonts and
macros stored in RAM, are saved if the printer receives a job that
requires more memory than is available.
Off*—The printer retains downloaded resources only until memory is
needed. It then deletes those resources associated with the inactive
printer language.
On—The printer retains all downloaded resources for all printer
languages during language changes and printer resets. If the printer
runs out of memory, 38 Memory Full appears.
Finishing Mode