Dell 2330d/dn Mono Laser Printer - Manual (Page 33)

* Factory default setting
On*
Off
PS
SmartSwitch
Set the printer to automatically switch to PostScript emulation when a print
job requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer and query printer status information at the
same time.
Off
On
Auto*
USB Buffer Assign a size to the USB input buffer.
Auto*
Disabled
3K to (in 1K increments).
MAC Binary
PS
Configure the printer to process Macintosh binary PostScript emulation print
jobs.
Off
On
Auto*
USB With
ENA ENA Address—Set the USB port ENA address
ENA Netmask—Set the USB port ENA Netmask
ENA Gateway—Set the USB port ENA Gateway
NOTE: 4-field IP address (0.0.0.0*)
NOTE: The settings are shown when an ENA is attached.
NOTE: This is applicable only to Dell 3300 Wireless Print Adapter (Sold
separately).
IPX Frame
Ethernet
802.2
Ethernet
802.3
Ethernet
Type II
Ethernet
SNAP
Allow the adapter to initiate conversations by setting the Ethernet value.
Off
On*
Parallel Mode
Mode Mode Main Menu
Parallel PCL SmartSwitch
PS SmartSwitch
NPA Mode
Parallel Buffer