beautypg.com

Installing the power supply – Dell XPS 720 (Mid 2007) User Manual

Page 154

background image

154

Removing and Installing Parts

Installing the Power Supply

1 Slide the power supply into place, ensuring that the tabs on the rear wall of the computer chassis latch

into place.

2 Replace the four screws that secure the power supply to the back of the computer chassis.
3 Replace the two hard drive bays.
4 Replace all hard drives installed in the interior hard drive bays (see "Installing a Hard Drive" on

page 110).

5 Replace the optional hard drive fan, if applicable (see "Installing the Optional Hard Drive Fan" on

page 138).

6 Reattach each of the DC power cables that were previously connected, carefully rerouting them as you

found them.

7 Replace the computer cover (see "Replacing the Computer Cover" on page 159).

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

8 Connect your computer and devices to electrical outlets, and then turn them on.