Dell PowerVault MD3000 - Manual (Page 25)

Software Installation
25
The Installation Wizard appears.
b Follow the instructions on each screen.
c After you click Install, the Status screen shows the progress of the
installation. When it shows that installation is complete, click Finish
to return to the main menu.
2 From the main menu, select Install MD3000 Storage Software.
The Installation Wizard appears.
3 Click Next.
4 Accept the terms of the License Agreement, and click Next.
The screen shows the default installation path.
5 Click Next to accept the path, or enter a new path and click Next.
6 Select an installation type:
• Typical (Full installation) — This package installs both the
management station and host software. It includes the necessary host-
based storage agent, multipath driver, and MD Storage Manager
software. Select this option if the host will also configure, manage, and
monitor the storage array.
• Host — This package installs the necessary storage agent and
multipath driver on a host physically connected to the storage array.
Select this option on all hosts that are connected to a storage array but
will not use MD Storage Manager.
NOTE:
Dell recommends using the host installation type if the host server is
running Windows Server 2008 Core version.
7 Click Next.
8 If the Overwrite Warning dialog appears, click OK. The software currently
being installed automatically replaces any existing versions of MD Storage
Manager.
9 If you selected typical (full) installation in step 6, a screen appears asking
whether to restart the event monitor automatically or manually after
rebooting. You should configure only one system (either a host or a
management station) to automatically restart the event monitor.