Dell PowerVault MD3000 - Manual (Page 39)

Post-Installation Tasks
39
9 If you have purchased premium features, you can set them up at this
point. Click Tools → View/Enable Premium Features or View and Enable
Premium Features on the Initial Setup Tasks dialog box. See "Advanced
Features" on page 39 for more information.
Verifying Storage Array Discovery
The Automatic Discovery option automatically discovers both in-band and
out-of-band arrays and adds the storage arrays to the management domain. If
the out-of-band or in-band connections shown on the Summary page are not
accurate, complete the following steps. For more information, refer to the
MD Storage Manager User’s Guide or MD Storage Manager online help.
1 Check the hardware and connections for possible problems. For specific
procedures on troubleshooting interface problems, see the Dell PowerVault
MD3000 Hardware Owner’s Manual.
2 Verify that the array is on the local subnetwork. If it is not, click the New
link to manually add it.
3 Verify that the status of each storage array is Optimal. If any array shows an
Unresponsive status, complete one of the following steps:
• To remove the array from the management domain, highlight the
array and then click the Remove link.
• To add an array, click the New link.
On Linux, click the Manual button and click OK.
4 If the array still shows an Unresponsive status, contact Technical
Assistance.
Advanced Features
Advanced features supported by MD Storage Manager include:
• Snapshot Virtual Disk
• Virtual Disk Copy
To install and enable these premium features, you must first purchase a
feature key file for each feature and then specify the storage array that will
host them. The Premium Feature Activation Card that shipped in the same
box as your MD3000 gives instructions for this process.