Dell PowerVault 745N - Manual (Page 13)

Rack Installation Guide
13
3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting
holes align with their respective holes on the back vertical rail.
4 Install two 10-32 x 0.5-inch flange-head Phillips screws in the back mounting holes to secure
the slide assembly to the back vertical rail.
Figure 6. Installing the VersaRails Slide Assemblies
5 Repeat step 1 through step 4 for the slide assembly on the other side of the rack.
6 Ensure that the slide assemblies are mounted at the same position on the vertical rails on
each side of the rack.
front of rack
slide assemblies (2)
10-32 x 0.5-inch
flange-head Phillips
screws (4 per slide
assembly)
mounting-bracket flange