Dell PowerVault 745N - Manual (Page 12)

12
Rack Installation Guide
www
.dell.com | support.dell.com
Figure 5. Installing the RapidRails Slide Assemblies
Installing the VersaRails Slide Assemblies
1 At the front of the rack cabinet, position one of the VersaRails slide assemblies so that its
mounting-bracket flange fits between the marks or tape (or numbered location) on the rack
(see Figure 6).
The three holes on the front of the mounting bracket should align with three of the holes
between the marks you made on the front vertical rail.
2 Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange’s top and
bottom holes to secure the slide assembly to the front vertical rail (see Figure 6).
front of rack
slide assemblies (2)
mounting hook
push button
mounting-bracket
flange
support tab