Dell 1250c Color Laser Printer - Manual (Page 147)

Troubleshooting 145
Random spots/Blurred images
Action Yes No
1 The print media surface may be uneven. Try
changing the Paper Type setting in the printer
driver. For example, change the plain paper to
thick.
1 On the Paper/Output tab in Printing
Preferences of the printer driver, change the
Paper Type setting.
Is the problem recovered?
The task is
complete.
Go to action 2.
2 Verify that the correct print media is being
used. See "Supported Paper Sizes" on page 56.
If not, use the print media recommended for
the printer.
Is the problem recovered?
The task is
complete.
Go to action 3.
3 Adjust the fuser temperature.
1 Launch the Tool Box, click Adjust Fuser on
the Printer Maintenance tab.
2 Adjust the fixing temperature by turning up
the value for your printing media.
3 Click Apply New Settings.
4 Click close box to exit Tool Box.
Is the problem recovered?
The task is
complete.
Contact Dell.