Dell 1250c Color Laser Printer - Manual (Page 97)

Understanding the Tool Box Menus 95
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
Registration
Adjustments *1
Y(Yellow) 0* Specifies lateral (perpendicular to
paper feed direction) color
adjustment values individually.
-5–+5
M(Magenta) 0*
-5–+5
C(Cyan) 0*
-5–+5
LY(Left
Yellow)
0* Specifies process (paper feed
direction) color adjustment values
individually.
-5–+5
LM(Left
Magenta)
0*
-5–+5
LC(Left
Cyan)
0*
-5–+5
RY(Right
Yellow)
0*
-5–+5
RM(Right
Magenta)
0*
-5–+5
RC(Right
Cyan)
0*
-5–+5
Apply New Settings After you complete the settings, press the Apply
New Settings button to apply the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings
button to apply the changes.
*1 This item is available only when Auto Registration Adjustment is set to Off.
*2 The color registration chart prints a lattice pattern of yellow, magenta, and cyan
lines. On the chart, find the values on the right side that are next to the line that is
perfectly straight for each of the three colors. If the value for this line is 0, color
registration is not needed. If the value for this line is any value other than 0, specify
the adjustment values under Registration Adjustments.