Dell XPS One 2720 (Mid 2013) - Manual (Page 50)

50 | Replacing the Inner Frame
Replacing the Inner Frame
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the inner frame with the screw holes on the display bezel.
NOTE: Ensure that all cables are routed through their routing guides and
no cables are placed between the inner frame and the display bezel.
2 Replace the screws that secure the inner frame to the display bezel.
Postrequisites
1 Replace the I/O panel. See "Replacing the I/O Panel" on page 41.
2 Replace the stand. See "Replacing the Stand" on page 22.
3 Replace the trim cover. See "Replacing the Trim Cover" on page 20.
4 Replace the back cover. "Replacing the Back Cover" on page 18.
5 Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 50 Wednesday, April 3, 2013 1:39 PM