Dell XPS One 2720 (Mid 2013) - Manual (Page 40)

40 | Removing the I/O Panel
Removing the I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the back cover. See "Removing the Back Cover" on page 17.
2 Remove the stand. See "Removing the Stand" on page 21.
3 Remove the trim cover. See "Removing the Trim Cover" on page 19.
Procedure
1 Push the I/O panel towards the top of the computer and then pivot the
I/O panel upward.
2 Ease the securing tabs on the I/O panel and lift the I/O panel off the
I/O-board assembly.
1 securing tabs 2 I/O panel
1
2
OM_Book.book Page 40 Wednesday, April 3, 2013 1:39 PM