Dell XPS One 2720 (Mid 2013) - Manual (Page 41)

Replacing the I/O Panel | 41
Replacing the I/O Panel
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the slots on the I/O panel with the ports on the I/O-board assembly.
2 Press down on the I/O panel until it snaps into place.
Postrequisites
1 Replace the trim cover. See "Replacing the Trim Cover" on page 20.
2 Replace the stand. See "Replacing the Stand" on page 22.
3 Replace the back cover. See "Replacing the Back Cover" on page 18.
4 Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 41 Wednesday, April 3, 2013 1:39 PM