Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 27)

support.dell.com Using the Dell PowerVault Switch Manager 2-17
+
%
Port Information provides statistics, by port. To display statistics for a particular port,
click the appropriate tab at the top of the window. Port information is automatically
updated whenever a port is selected; this information is also refreshed periodically
while the port is selected.
Figure 2-8 shows the Port Information window. Table 2-8 provides a description for
each component in this window.
thermometer icon Indicates the highest temperature from the last data
sample. Click to display the temperature readings from
all switch thermo sensors
admin. button Click to link to the Administrative Interface, where you
can perform switch management functions
telnet button Click to launch a Telnet session
perform. button Click to link to the Performance window, where you
can monitor switch performance
fan icon Spinning disks indicate that the fans are operating; if a
disk stops spinning and turns yellow, the fan is experi-
encing a problem
power supply icon Left and right power assemblies are updated to show
the presence/absence and status of each power supply
)
%