Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 26)

2-16 Dell PowerVault Switch Manager User’s Guide
LED status indicator
icon No light — No device attached
Steady yellow — Receiving light, but not online;
(check cable connections)
Slow yellow — Disabled (diagnostics or
portDisable command)
Fast yellow — Error, fault with port
Steady green — Online (connected with a device
by cable)
Slow green — Online but segmented (loopback
cable or incompatible switch)
Fast green — Internal loopback (diagnostic)
Flickering green — Online and transmitting and
receiving frames
WWN field Unique permanent numeric identifier for each switch;
assigned by the manufacturer.
Domain ID field Number that uniquely identifies the switch in a fabric
Role field Principal — Principal switch as defined in FC_SW
protocol
Subordinate — Switch enabled, but not as the
principal switch
Disabled — Switch disabled
State field Switch state:
Online
Offline
Testing
Faulty
Firmware field Firmware version
Ether IP field Ethernet IP address
Ether NM field Ethernet netmask value
FC IP field Fibre Channel IP address
FC NM field Fibre Channel netmask value
Gateway field IP address of the default gateway; must be properly set
to access the switch from other networks
)
%