Dell PowerVault 56F (16P Fibre Channel Switch) - Manual (Page 33)

support.dell.com Using the Dell PowerVault Switch Manager 2-23
-
%
Switch Name field Displays or sets the switch name. To change the name,
enter a new name in this field.
Domain ID field Displays or sets the switch domain ID. Domain IDs
must be unique within a fabric.
To change the domain ID, enter a new domain ID in this
field. Use a number from 1 to 239 for normal operating
mode (FCSW compatible) and a number from 0 to 31
for VC-encoded address format mode (backward com-
patible to PowerVault 50F switch).
Switch Disabled
checkbox Check to disable the switch; uncheck to enable.
Network
Configuration
Ethernet IP field Displays or sets the IP address for the Ethernet connec-
tion to the switch.
Ethernet
Subnetmask field Displays or sets the ethernet subnetmask. The default
value is none. Contact your network administrator for
the value to enter. If you change the value, restart your
browser.
Fibre Channel IP
field Displays or sets the Fibre Channel IP address.
Fibre Channel
Subnetmask field Displays or sets Fibre Channel subnetmask. If you
change the value, restart your browser.
Gateway IP field Displays or sets the gateway IP address. Contact your
network administrator for the IP address. If you change
the value, restart your browser.
Syslog Daemon
IP field Displays or sets the destination station IP address for
sending events using syslog protocol to host. Contact
your network administrator for the IP address.
Switch Port
Configuration field
Port Disabled
checkbox If checked, the port is disabled. To enable the port,
uncheck the box.
Commit Configu-
ration Changes
button Click to apply the changes you made.
Reset button Click to reset all components to the values present
when you launched the Switch Administration.