Input trays, Output trays – Dell 7330dn Mono Laser Printer User Manual
Page 69
Additional PCL Commands
Dell 7330 Mono Laser Printer System Administrator Guide
B-4
Input Trays
The following table lists the most common PCL commands for the input trays supported by
your printer. The table also lists the alternate tray used if the optional input tray is not installed.
Note:
When more than one command is listed, you can use either command.
Output Trays
The following table lists the PCL commands and PJL values for the output trays supported by
your printer, if applicable.
Input Trays
Dell 7330
PCL 5 Command
Alternate Tray
Tray 1
n/a
n/a
Tray 1 (MPT) in multi-sheet mode
n/a
Tray 1 (MPT) in manual feed mode
n/a
Tray 2
n/a
Tray 3
Tray 2
Tray 4
Tray 1
Tray 5
Tray 1
Autoselect
n/a
Tray 6
Current tray/page eject
n/a
* The character that follows the “&” in the command is the lowercase letter “L.”
Output Tray
PCL 5 Command
*
PJL Value
Top output tray
FACEDOWN, UPPER,
STANDARD, or OFFSET
* The character that follows the “&” in the command is the lowercase letter “L.”
** The PJL Value is used with the PJL “OUTBIN” variable.