Dell 7330dn Mono Laser Printer - Manual (Page 59)

Dell 7330 Mono Laser Printer System Administrator Guide
A-1
The printer has a configuration card that stores network parameters and configuration (dn)
data. The configuration card is hot swappable, enabling you to share or replace it, providing an
alternative to on-site service.
Network settings are saved on the configuration card. If the configuration card is removed
from an old printer and inserted into a new printer, the saved settings on the configuration card
are copied to the new printer when it is powered on. The new printer assumes the identity of
the old printer, eliminating the need to reconfigure network settings.
This appendix includes:
„ General Information Parameters on page A-2
„ PostScript Parameters on page A-2
„ PCL Parameters on page A-3
„ USB 2.0 Parameters on page A-3
„ Hard Drive Parameters on page A-3
„ Network Information Parameters on page A-3
„ Ethernet Network Parameters on page A-3
„ EtherTalk Parameters on page A-4
„ TCP/IP Parameters on page A-4
„ DNS Parameters on page A-5
„ SLP Parameters on page A-5
„ SSDP Parameters on page A-5
„ NBNS (WINS) Parameters on page A-5
„ Access Control Parameter on page A-5
„ LPR Parameters on page A-5
„ AppSocket (Port 9100) Parameters on page A-6
„ IPP (Internet Printing Protocol) Parameters on page A-6
„ SNMP Parameters on page A-6
„ Embedded Web Server (HTTP) Parameters on page A-6
„ FTP Parameters on page A-6
„ Status Notification Parameter on page A-7
„ MaiLinX Remote Printing Parameters on page A-7
A Configuration Card
Parameters