System setup (volume, beep, etc.), Co py – Canon DC 310 User Manual
Page 68
68 •
Additional Information
System Setup (Volume, Beep, etc.)
SYSTEM SETUP
[SPEAKER VOL.]: Adjust (
) the volume of the playback.
[BEEP]: A beep will accompany some operations like turning on the camcorder, the self-
timer countdown, etc. It also serves as a warning beep under unusual conditions.
[POWER SAVE]: In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for 5 minutes. Approximately
30 seconds before the camcorder shuts off, the message “
AUTO POWER OFF” will
appear.
[
STANDBY OFF]: Select the length of time after which the camcorder will end the
standby mode and shut off automatically.
[FILE NOS.]: Select the image numbering method to be used when you insert a new
memory card.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[
RESET]: Image numbers will restart from 101-0101 every time you insert a new
memory card.
[
CONTINUOUS]: Image numbers will continue from the number following that of the
last image recorded with the camcorder.
• If the memory card you insert already contains an image with a larger number, a new
image will be assigned a number one higher than that of the last image on the memory
card.
• We recommend using the [
CONTINUOUS] setting.
[TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the
setting according to the type of television to which you will connect the camcorder.
[
NORMAL TV]: TV sets with 4:3 aspect ratio.
[
WIDE TV]: TV sets with 16:9 aspect ratio.
[FIRMWARE]: You can verify the current version of the camcorder’s firmware. This menu
option is usually grayed out.
Menu item
Setting options
CAMERA
PLAY
[SPEAKER VOL.]
–
–
z
–
–
[BEEP]
[
HIGH VOLUME],
[
LOW VOLUME], [
OFF]
z
z
z
z
–
[POWER SAVE]
[
ON], [
OFF]
z
z
z
z
–
[
STANDBY OFF]
[
10 min], [
20 min],
[
30 min]
z
z
–
–
–
[FILE NOS.]
[
RESET], [
CONTINUOUS]
–
z
–
–
–
[TV TYPE]
[
NORMAL TV], [
WIDE TV]
z
z
z
z
–
[FIRMWARE]
–
–
–
–
z
–
CO
PY