Canon IXUS 130 - Manual (Page 52)

52
Power Saving Function (Auto Power Down)
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The screen will turn off approximately 1 minute after the camera is last operated.
After about 2 more minutes, the lens will retract and the power will turn off. When
the screen has turned off but the lens has not yet retracted, pressing the shutter
button halfway
(p. 23) turns on the screen and shooting can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last operated.
Clock Functions
You can check the current time.
● Press and hold the m button.
X The current time appears.
● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the
qr buttons to
change the display color.
● Press the m button to cancel the clock
display.
• Low level formatting may take longer than standard formatting, since all
recorded data are erased.
• You can stop a low level format of a memory card by choosing [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
• You can turn off the Power Saving Function (p. 146) .
• You can adjust the time before the screen turns off (p. 146) .
When the camera power is off, press and hold the m button, then press
the ON/OFF button to display the clock.